News and Events

Summary of Common Problems and Countermeasures in Sewage Treatment Plants in Spring

2026-03-21
Spring is a season with frequent operational problems in sewage treatment plants, mainly affected by rising temperatures, increased rainfall, and changes in microbial activity.The following is a detailed summary of common problems, cause analysis and solutions in sewage treatment plants in spring:1....

5 Major Causes of Sludge Deflocculation and Corresponding Solutions

2026-03-20
All sludge dewatering equipment launched by Kaiya Environmental Protection adopts physical dewatering technology, and flocculants or coagulants need to be added to the sludge to achieve flocculation effect. In actual operation, sludge deflocculation may be caused by the following five reasons.1. Nut...

Six Core Factors Controlling Dissolved Oxygen in Wastewater Treatment

2026-03-19
Raw Water QualityThe higher the organic matter content in raw water, the greater the oxygen consumption for microbial decomposition, metabolism and nitrification. When controlling dissolved oxygen, focus should be placed on fluctuations in influent flow rate and changes in influent organic matter co...

What is a Screw Press Dehydrator? What are the Differences Between It and Plate-and-Frame, Belt, and Centrifugal Dehydrators?(Ⅲ)

2026-03-18
III. Common Faults and Solutions of Screw Press Dehydrator 1. Sludge Clogging and Jamming of the Main Dewatering Body Causes:1. Equipment quality problems, especially the flatness of the screw shaft and ring plates. As the main dewatering components of the screw press, if the manufacturer cuts corne...

What is a Screw Press Dehydrator? What are the Differences Between It and Plate-and-Frame, Belt, and Centrifugal Dehydrators?(Ⅱ)

2026-03-17
II. Differences Between Screw Press Dehydrator and Other Dehydrators1. Screw Press DehydratorIt features a small floor area, low flushing water consumption, low noise and a good workshop environment, but the processing capacity of a single unit is small and the solid content of the supernatant is hi...

What is a Screw Press Dehydrator? What are the Differences Between It and Plate-and-Frame, Belt, and Centrifugal Dehydrators?(Ⅰ)

2026-03-16
Sludge dewatering processes are divided into three categories by principle: vacuum filtration dewatering, pressure filtration dewatering and centrifugal dewatering, with main equipment forms including belt filter presses, plate-and-frame filter presses, centrifugal dehydrators and screw press dehydr...

Introduction and Purchasing Guide for High-Pressure Belt Filter Press

2026-03-14
In the fields of industry and sewage treatment, the high-pressure belt filter press is a core device for achieving efficient sludge dewatering and reducing treatment costs. Faced with numerous equipment manufacturers and products on the market, how to select a reliable and cost-effective high-pressu...

[International Cooperation] Thai Clients Visit Kaiya Environmental Protection—Exploring New Opportunities in the Environmental Protection Sector

2025-12-22
Recently, a group of Thai clients visited Kaiya Environmental Protection for exchange and discussions. The two sides held in-depth talks on topics such as the application of environmental protection technologies and project cooperation. They also visited the production workshop and project site for ...
123